Physics
Motion, energy, force and wave calculations.
Kinematics
Motion, velocity, acceleration and projectile paths.
Speed, Distance, Time
Calculate speed, distance or time for uniform motion.
s = vtUniform Acceleration
Solve one constant-acceleration equation at a time from exactly the required independent inputs.
v=u+at; s=ut+½at²; v²=u²+2asFree Fall
Solve vertical motion with gravity and no air resistance; upward is positive.
s=ut+½gt²; v=u+gt (downward-positive coordinates)Projectile Motion
Ideal projectile trajectory with no air resistance; impact height need not equal launch height.
x=v₀cos(θ)t; y=h₀+v₀sin(θ)t−½gt²Circular Motion
Derive period, angular velocity, tangential speed and centripetal acceleration from radius and frequency.
ω=2πf=2π/T; v=ωr; a꜀=ω²rForces & Dynamics
Forces, friction, momentum, impulse and collisions.
Newton's Second Law
Solve force, mass or acceleration from F=ma.
F=maWeight and Gravitational Force
Calculate gravitational force (weight) from mass and a selected gravitational acceleration.
Fg=mgFriction Force
Calculate maximum static friction or kinetic friction. Static friction below its maximum depends on the applied force.
Fstatic,max=μsN; Fkinetic=μkNInclined Plane
Resolve gravity and friction along a slope. With kinetic friction, assume the block is already sliding downhill.
F∥=mg sinθ; N=mg cosθ; a=g(sinθ−μₖcosθ)Centripetal Force
Calculate inward resultant force from mass, radius and tangential speed or angular velocity.
Fc=mv²/r=mω²rMomentum and Impulse
Calculate linear momentum or impulse from average force and elapsed time or from momentum change.
p=mv; J=FavgΔt=ΔpOne-Dimensional Collision
Solve elastic or perfectly inelastic 1D collisions. Positive and negative velocities define direction along one axis.
Momentum conserved; elastic collisions also conserve kinetic energy.Work, Energy & Power
Mechanical work, energy changes, power and efficiency.
Mechanical Work
Calculate work from force, displacement and their included angle.
W=Fs cosθMechanical Energy
Calculate kinetic, gravitational potential, elastic potential or total mechanical energy from explicitly supplied properties.
Ek=½mv²; Eg=mgh; Es=½kx²Mechanical Energy Conservation
Compare kinetic plus gravitational potential energy in two states for an ideal system with no non-conservative work.
E=½mv²+mgh; ΔE=Efinal−EinitialMechanical Power
Calculate average power from work and time or instantaneous translational power from force and velocity.
P=W/t; P=Fv cosθEnergy and Power Efficiency
Calculate useful output divided by input as a percentage using energy or power quantities.
η=(useful output/input)×100%Fluids
Density, pressure, buoyancy and ideal-flow relationships.
Density and Pressure
Calculate density from mass and volume or pressure from force and area.
ρ=m/V; p=F/AHydrostatic Pressure
Calculate gauge or absolute pressure at depth in a static fluid.
pgauge=ρgh; pabsolute=patm+ρghPascal’s Principle / Hydraulic Press
Use equal pressure in a connected ideal hydraulic fluid to solve the output force or piston area.
F₁/A₁=F₂/A₂Archimedes’ Principle
Calculate buoyant force from fluid density and the explicitly supplied displaced volume.
Fb=ρfluid g VdisplacedFlow Rate and Continuity
Calculate volumetric flow from volume/time or area/speed, or use continuity for steady incompressible flow.
Q=V/t=Av; A₁v₁=A₂v₂Bernoulli Equation
Solve downstream pressure along one streamline for steady incompressible ideal flow with negligible viscous losses.
p₁+½ρv₁²+ρgh₁=p₂+½ρv₂²+ρgh₂Thermal Physics
Heat transfer, gases, expansion and thermodynamic cycles.
Heat Transfer and Calorimetry
Calculate sensible heat, latent heat, or the ideal equilibrium temperature of two substances in an insulated mixture.
Q=mcΔT; Q=mL; heat lost + heat gained = 0Thermal Expansion
Calculate linear or volumetric expansion with an explicitly supplied material coefficient.
ΔL=αL₀ΔT; ΔV=βV₀ΔTIdeal Gas Law
Solve pressure, volume, amount or absolute temperature using PV=nRT. Temperature is Kelvin.
PV=nRTGas Laws
Solve Boyle, Charles, Gay-Lussac or combined gas law relations for a state variable; temperatures are absolute kelvin.
P₁V₁/T₁=P₂V₂/T₂ when amount of gas is constantFirst Law of Thermodynamics
Calculate internal-energy change using the convention that W is work performed by the system.
ΔU=Q−W (W is work done by the system)Carnot Efficiency
Calculate the ideal reversible heat-engine efficiency from hot and cold reservoir temperatures in kelvin.
η=1−Tc/ThWaves & Sound
Wave properties, sound levels, Doppler shift and resonance.
Waves and Sound
Calculate wave parameters, a numerical waveform, sound intensity/level, or a harmonic resonance frequency.
v=fλ; y=A sin(kx−ωt+φ); I=P/ADoppler Effect
Calculate observed sound frequency. Positive observer velocity points toward the source; positive source velocity points toward the observer.
f′=f(v+vo)/(v−vs)Optics
Reflection, refraction, total internal reflection and image formation.
Reflection and Refraction
Use angles measured from the surface normal for reflection, Snell refraction, critical angle and total internal reflection.
θi=θr; n₁sinθ₁=n₂sinθ₂; θc=asin(n₂/n₁)Thin Lens and Mirror Equation
Solve the thin lens or mirror equation using f>0 for converging lenses/concave mirrors and signed image distance for real or virtual images.
1/f=1/do+1/di; m=−di/doModern & Nuclear Physics
Photons, matter waves, mass-energy and radioactive decay.
Modern Physics
Calculate photon energy and momentum, de Broglie wavelength, mass-energy, or nuclear binding energy using stated masses.
E=hf=hc/λ; p=h/λ; λ=h/p=h/(mv); E=mc²Radioactive Decay and Activity
Calculate exponential decay, activity, elapsed time, half-life or decay constant from stated quantities.
N=N₀e^(−λt)=N₀2^(−t/T½); A=λNElectricity & Magnetism
Electric forces and fields, potential, magnetic force and induction.